Numerical Observation of Flow Re-stabilizing via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-Volume Approach

In the present work, the air-injection as an active flow stabilizing techniques were numerically examined during the aerodynamic behavior and the characteristics of an axial compressor. First, indesign condition, the characteristic curve was numerically captured for a specified test compressor. Thecomputed results showed good agreements with those obtained from the experiments. They validate the finite-volume solver which was developed based on Van Leer’s flux splitting algorithm in conjunction with TVD limiters and the κ-e turbulence model. At the second step, to examine theperformance of the air injection technique unstable condition, the operating points were set for the unstable condition upon the operating map, and the expected unstable flow patterns were captured. At the final step, the numerical simulation was completed with the air injection, and surprisingly, theunstable flow patterns became highly re-stabilized. Consequently, a significant recovery of the performance was augmented. The study could successfully demonstrate the capability of the numerical studies for simulating the active flow controls specifically the inlet air-injection technique using a 2-D finite volume approach

کلیدواژه ها:

Axial Compressor ، Numerical Approach ، 2-D ، Stabilizing ، Air Injection