Finite Element Analysis for Estimating the Effect of Various Working Conditions onthe Temperature Gradients Created Inside a Rolling Tire
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 27، شماره: 12
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 441
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-27-12_015
تاریخ نمایه سازی: 13 مرداد 1394
چکیده مقاله:
Periodic deformation of a tire during its rolling motion causes energy dissipation and heat generationdue to hysteretic nature of the rubber. Because of rubber low thermal conductivity, the tire temperatureincreases and leaves unwelcomed effects on safe service life and safety of vehicles. In this study anumerical simulation based on finite element method is used for evaluating the effect of variousworking conditions on temperature field of a rolling tire. In each case, the maximum createdtemperature is checked to be less than critical level. Compared with related published studies, theobtained results show a very good consistency and validity.
کلیدواژه ها:
Finite Element MethodTemperature GradientNumerical SimulationHysteresis LossRolling Tire
نویسندگان
M Namjoo
Department of Agricultural Machinery Engineering, Faculty of Engineering, University of Jiroft, Iran
H Golbakhshi
Department of Mechanical Engineering, Faculty of Engineering, University of Jiroft, Iran