Prediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 29، شماره: 9
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 377
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-29-9_017
تاریخ نمایه سازی: 12 دی 1395
چکیده مقاله:
Many researchers have developed algorithms to predict welding parameters. The variety of welding types is broad because the confine mixture of pressure and temperature could be selected. This paper introduces a response surface methodology (RSM) for optimization and prediction of the influence of Ar and CO2 gases and electrical current on tensile strength of St52’s gas metal arc weld (GMAW) line. After doing experiments the optimum levels of input variables for achieving high tensile strength and contribution of parameters have been obtained by RSM and ANOVA; respectively. In this study the maximum error is 0.44%. Thus it can be concluded that, RSM is one of the best methods and can be used to predict the output parameters and save the time and cost of additional experiments.
کلیدواژه ها:
Gas Metal Arc WeldResponse Surface MethodologyANOVASt52Tensile Strength
نویسندگان
A Doniavi
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran
A Hosseini
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran
G Ranjbary
Mechanical Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran