Structural Performance of Sustainable Waste Palm Oil Fuel Ash-Fly Ash Geo-polymer Concrete Beams

سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 515

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JETT-2-3_007

تاریخ نمایه سازی: 12 آبان 1393

چکیده مقاله:

This study is an attempt to highlight the use of Palm Oil Fuel Ash (POFA) with Fly Ash, instead of cement, in reinforcedconcrete beams. POFA, a waste from Palm oil mill and Fly Ash, a waste from coal-burning power stations which are cheap andavailable. It is expected that millions tonnes of palm oil waste will be produced annually and a lot of money will be spent totransport and maintenance the waste. Environment is also being destroyed by the emission of CO2 in Portland cement industries(global warming).Hence, it has become necessary that the study efforts in using of Geo-polymer concrete gain greater attention.In this study, laboratory tests were carried out to determine flexural strength, deflection and crack pattern for three kinds ofmaterials that were used in reinforced concrete beams [ POFA-Fly Ash Geo-polymer concrete, Fly Ash Geo-polymer concreteand OPC (Ordinary Portland Cement ) concrete]. The experimental result showed that the behaviour of reinforced POFA- FlyAsh concrete beams was similar to reinforced OPC concrete beams since the cracking and ultimate moments of them were closetogether in 90th day. Regarding to durability study, POFA-Fly Ash concrete had a better resistance and performance against acidicconditions in comparison with OPC concrete due to more density and uniformity which was proved by ultrasonic pulse velocity(UPV) tes

کلیدواژه ها:

Waste Geo-polymer Concrete Beam ، Flexural Strength ، Deflection ، Crack Pattern ، Acidic Conditions ، UPV Test

نویسندگان

Ramin Andalib

Faculty of Civil Engineering, Construction Research Alliance, Universiti Teknologi Malaysia (UTM), Skudai, ۸۱۳۱۰ JohorBahru, Malaysia.

Mohd Warid Hussin

Faculty of Civil Engineering, Construction Research Alliance, Universiti Teknologi Malaysia (UTM), Skudai, ۸۱۳۱۰ JohorBahru, Malaysia.

Muhd Zaimi

Faculty of Civil Engineering, Construction Research Alliance, Universiti Teknologi Malaysia (UTM), Skudai, ۸۱۳۱۰ JohorBahru, Malaysia

Mohd Azrin

Faculty of Civil Engineering, Construction Research Alliance, Universiti Teknologi Malaysia (UTM), Skudai, ۸۱۳۱۰ JohorBahru, Malaysia