Processing-structure-property Investigation on the Friction Stir Welding of 5052 Aluminum Alloy beside applying Cr2O3 nano-particles
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 883
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECHCONF01_144
تاریخ نمایه سازی: 21 شهریور 1395
چکیده مقاله:
FSW has received a great deal of attention as a new solid-state welding technique. In the current study, a square-pin-profiled tool was used to perform FSW on AA5052 plates. The main aim of this article was to find out the appropiate rotational and traverse speeds to gain better microstructural and mechanical properties. In an attempt to study the microstructural and mechanical properties of the joints, optical microscopy (OM) and scanning electron microscopy (SEM) were employed. Three different rotational speeds of 500, 800 and 1000 rpm and three different traverse speeds of 32, 80 and 125 mm/min. An increase in the rotational speed increased the ultimate tensile strength and microhardness of the specimens. At the best welding condition, by employing the rotational and traverse speeds of 1000 rpm and 80 mm/min, respectively, 66 % enhancement in the elongation and 8.5 % increase in the microhardness of the welded samples were obtained. Moreover, the ultimate tensile strength of this welded joint reached to 80 % of the base metal. To investigate the effects of reinforcements’ application on FSW, Cr2O3 nano-particles were induced at the optimized conditions. It was revealed that performing FSW with the precence of reinforcements reduces the UTS due to the intensive agglomaration of the reinforcements.
کلیدواژه ها:
نویسندگان
Amir Chamanara
Young Researchers and Elite Club, Tabriz Branch, Islamic Azad University, Tabriz, Iran
Mehran Tamjidi Eskandar
Young Researchers and Elite Club, Tabriz Branch, Islamic Azad University, Tabriz, Iran
Hadi Jafarlou
Undergraduate student of material engineering, Department of materials Engineering, Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Kosar Hasannejad
Undergraduate student of material engineering, Department of materials Engineering, Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :