insight into effect of preparation parameters on performance of gas separation nanocomposite membrane using ecperimental design
محل انتشار: دومین همایش ملی غشا و فرایندهای غشایی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 841
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MEMBRANE02_004
تاریخ نمایه سازی: 22 مهر 1394
چکیده مقاله:
The performance of nanocomposite membrane based on polyethersulfone (PES) for gas separation was investigated using experimental design. A significant influence of polymer concentration, nanoparticle type, nanoparticle concentration, solvent type, solution mixing time, evaporation time, and annealing temperature on membrane performance (permeability and selectivity) was evaluated by Plackett–Burman design (PBD). The results showed polymer concentration, nanoparticle concentration, solution mixing time, and evaporation time processing factors had significant effects on the gas permeability. It was also found that the nanoparticle type, nanoparticle concentration, and polymer concentration had significant effects on membrane selectivity. By identifying, the effective factors could eliminate trade-off limitation between gas permeability and selectivity in gas membrane
کلیدواژه ها:
نویسندگان
m farrokhnia
Department of Chemical and Petroleum Engineering, Sharif University of Technology, Research Institute of Petroleum Industry,
m rashidzadeh
Research Institute of Petroleum Industry,
g khanbabaei
Research Institute of Petroleum Industry,
a safekordi
Department of Chemical and Petroleum Engineering, Sharif University of Technology,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :