Static and free vibration analyses of functionally graded carbon nanotube-reinforced composite plate using three dimensional theory of elasticity
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 468
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NAAME01_119
تاریخ نمایه سازی: 16 شهریور 1395
چکیده مقاله:
This work present static and free vibration analyses of composite plates reinforced by single-walled carbon nanotubes using the three dimensional theory of elasticity. The SWCNT reinforcement is either uniformly distributed (UD) or functionally graded (FG) in the thickness direction which, are specified as FG-V, FG-O and FG-X. In the present study the effective material properties of CNTRC plates, estimated according to the rule of mixture and considering the CNT efficiency parameters. By using Fourier series expansion along the in plane directions and state space technique across the thickness direction closed form solution is derived. The influences types of distributions of carbon nanotubes in the polymer matrix in the behaviour of plate are investigated. In addition, the influences of the width-to-thickness ratios and edges static behaviour of the CNTRC plate will be discussed. Numerical examples are calculated by an analytical solution and the results show good agreement with the solutions obtained by the FEM solution in literature[6].
کلیدواژه ها:
نویسندگان
Mohsen Alizadeh
Master, Gachsaran Petrochemical Company
Mohsen Tajgardoon
Master, Gachsaran Petrochemical Company
Ali Emtehani
PhD. student, Department of Mechanical Engineering, Persian Gulf University of bushehr