Investigation of Influences of Modeling of the Panel Zone in the Vierendeel Frames

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 931

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NCCE08_0922

تاریخ نمایه سازی: 5 مهر 1393

چکیده مقاله:

Vierendeel frames are widely used in building construction. Panel zone is one of the most important parts of the frame which plays significant role in the stability of it. Modeling the frames based on centerlinedimensions of the beams and columns always will not give realistic results in the panel zone region.Therefore, Different linear and nonlinear models with panel zone have proposed to better simulate their performances. In this paper, a 3-story vierendeel frame is modeled using centerline dimensions of theelements without panel zone as well as different linear and nonlinear models with panel zone. OpenSeessoftware is used in order to evaluate of this frame behavior under cyclic loading and Pushover loading.Then the seismic parameters of the frame such as ductility, energy dissipation, and strength are obtained. Furthermore the joints with different rigidities are evaluated based on displacement control

نویسندگان

Khadijeh Askari Pour

M. Sc. Student of Civil Eng. Dept., Shahid Bahonar University, Kerman, Iran

Jalal Najmadini

M. Sc. Student of Civil Eng. Dept. Zahedan Azaad University, Iran

Mohammad Javad Fadaee

Associate Prof. of Civil Eng. Dept., Shahid Bahonar University, Kerman, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Douglas, A. F. (2002), "Modeling of steel moment frames for ...
  • Popov, E. P. (1987), "Panel zone flexibility in seismic moment ...
  • Kim, K. D. (2002), "Monotonic and cyclic loading models for ...
  • Castro, J. M. (2005), "Modeling of the panel ZOne in ...
  • Altoontash, A. (2004), "Simulation and damage models for performance assessmet ...
  • نمایش کامل مراجع