Numerical Simulation of Heat Transfer Characteristics in Curved Pipe Subjected to Nanofluid
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,068
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCFDACCI05_045
تاریخ نمایه سازی: 14 مرداد 1393
چکیده مقاله:
In this study different nanofluids are numerically simulated in curved pipe. The curved pipe is subjected to constant temperature at the wall. The incompressible Navier-Stokes and energy equations are solved in a body fitted coordinates system using a control volume technique. Two different approaches for nanofluids are taken into account: single and two-phase models. Thermophysical properties of Nanofluids are assumed to depend on particles volume fraction and temperature. Heat transfer rate by the use of different nanofluids are compared. Results indicate that using nanofluids increase the heat transfer rate. The proposed results by two phase model are slightly higher than single phase model. The effect of nanofluids concentration on velocity contours and temperature fields are shown. The velocity profiles are not strongly affected by the additional nanoparticle suspension, especially at low concentrations where the addition of small amount of nanoparticles (1%) drastically changes the temperature profiles inside the tube. Using temperature dependant properties results in more heat transfer rate and generates more uniform cross sectional temperature distributions.
کلیدواژه ها:
نویسندگان
n jamshidi
Assistant Professor, Mechanical engineering Department, Payame Noor University, Tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :