Silica–filled SBR Nanocomposites: A Comparison between two Silane Coupling Agents on the Properties of Nanocomposites
محل انتشار: اولین همایش نانومواد و نانوتکنولوژی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,484
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCNN01_425
تاریخ نمایه سازی: 17 اردیبهشت 1391
چکیده مقاله:
The poor dispersity of silica particles in rubber matrixes is caused by the formation of a secondary structure (aggregate and agglomerate) of silica particles via silanol groups on the silica surfaces. Toenhance the interfaces between silica nanoprticles and SBR matrix and preventing silanol interfering in curing system, silica surface should bemodified. In the present study, 3-Aminopropyl triethoxy silane and 3- Mercaptopropyl trimethoxy silane have been employed to treating the silicasurface. Tensile was performed for determination of interfacial properties of the Silica/SBR nanocomposites. The result showed increasing in moduli at100% elongation and reduction in peak strain and elongation at break, for nanocomposites with modified silica. SEM images confirm better dispersion of nanosilica in modified silica-filled SBR nanocomposites
کلیدواژه ها:
نویسندگان
S Kazemi
Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
M Abdoudd
Department of Chemistry, Amirkabir University of Technology, Tehran
A.A .Katbab
Department of Polymer Engineering, Amirkabir University of Technology, Tehran, Iran
M Javanbakht
Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :