Investigation of the optimum number of heat pipe rows in HPHX with different working fluids used for energy saving in an air conditioning system

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,092

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NICEC14_009

تاریخ نمایه سازی: 3 آذر 1391

چکیده مقاله:

Heat pipe heat exchangers (HPHXs) are playing a considerable role in different fields including air conditioning systems. We applied such an air conditioning system for treating hot and humid air with the use of HPHXs in series which were charged with methanol and ethanol as working fluids. In this research, experiments were carried out for 2, 3, 4 and 5 rows and two defined conditions of inlet air. energy saving values were calculated and compared in order to obtain the optimum number of heat pipe rows and best working fluid. Results showed that in both defined conditions, 3-row HPHX and methanol had the best performance

کلیدواژه ها:

Heat pipe heat exchanger ، Air conditioning ، Working fluid ، Energy saving ، Optimum number of rows

نویسندگان

H.S Kazemi

Chemical Engineering Department, Engineering Faculty, Ferdowsi University of Mashhad, Mashhad, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Y.H. Yau, M. Ahmadzade htalatapeh, A review on the application ...
  • S.H. Noie-Baghban, G.R. Majideian, Waste heat recovery using heat pipe ...
  • M.A. Abd El-Baky, M.M. Mohamed, Heat pipe heat exchanger for ...
  • X.P. Wu, P. Johnson, A. Akbarzadeh, Application of heat pipe ...
  • Y.H. Yau, Experimental thermal performance study of an inclined heat ...
  • نمایش کامل مراجع