Evaluation of the Shell Type Gauge for Warp Tension Measurement on a Weaving Machine
محل انتشار: چهارمین کنفرانس ملی مهندسی نساجی ایران
سال انتشار: 1381
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,469
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NTEC04_006
تاریخ نمایه سازی: 20 مرداد 1391
چکیده مقاله:
The strain gauge based shell-type yarn tension gauge is one of the simplest devices suitable for the measurement of warp tension on a loom. Its response is assumed to be linear with the variation of warp tension, but this assumption is likely to be true only for small variations of tension. The considerably large amplitude of warp tension variation involved in most weaving operations, suggests that the response of the device may not be quite linear, due to the likelihood of slipping of the yarn on the contact surfaces of the gauge as well as the finite amount of cyclical bending undergone by the shell. Computer simulation of a typical gauge under sinusoidal loading shows that the output signal of the gauge has some non-linearity, which may still be considered small enough for most applications
نویسندگان
S.A Mirjalili
Department of Textiles, Yazd University, Iran
M.P.U. BANDARA
School of Textile Industries, The University of Leeds, Leeds, U.K
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :