A new workflow for optimization of WAG injection process in an Iranian oil reservoir
محل انتشار: اولین همایش ملی توسعه میادین نفت و گاز
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 954
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
OGFD01_111
تاریخ نمایه سازی: 1 مهر 1394
چکیده مقاله:
Availability of hydrocarbon gases at the field makes it attractive for gas-based EOR methods such as WAG Injection. Optimization of EOR methods requires too many simulation runs which are time-consuming and expensive. Therefore, developing a proxy model, which emulates simulator outputs, is considered as an appropriate alternative technique. In this work effects of composition changes of injection gas, WAG ratio, and slug size on produced oil and water are investigated. In addition, the optimum value of the above parameters, including some constrains, are presented using response surface methodology. Experimental design is also applied to construct different polynomial regression models as proxy models for a sector of an Iranian oil reservoir under WAG injection scenario. A new work flow is introduced for optimization of the WAG parameters, which all effecting parameters are changing simultaneously.
کلیدواژه ها:
نویسندگان
Hamed Panjalizadeh
Mehran Engineering and well services company, Mehran Dead End, One Block Northward from Emdad-Sharghi St, Sheikh Bahaie Lane North Molla-Sadra Ave,Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :