Operation of AC Chopper as Downstream Fault Current Limiter and Overvoltage Compensator
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,344
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PEDSTC02_060
تاریخ نمایه سازی: 21 تیر 1391
چکیده مقاله:
The ac choppers are usually used as voltage regulators and voltage sag compensators. However, the voltage compensation range is usually limited to %20 of the nominal voltage. Although the ac choppers can compensate deeper voltage sags from the structure point of view, it can be a challenging issue as it is not equipped with energy storage. To compensate deeper voltage sags with a series connected ac chopper it is necessary to boost more power from the faulted grid. This causes considerable increase in the grid current. Consequently, the grid current rating might be violated. Also, the additional voltage drop on the line impedance can be harmful for the adjacent loads. As a result, it seems that application of the series connected ac chopper to compensate voltage sags is really a challenging problem. This paper proposes new applications of the series connected ac chopper. The series connected ac chopper is used as overvoltage compensator and downstream fault current limiter (FCL). The proposed applications are demonstrated using simulation results in the PSCAD/EMTDC environment.
کلیدواژه ها:
نویسندگان
mohammad Farhadi Kangarlu
Faculty of Electrical and Computer Engineering University of Tabriz Tabriz, Iran.
ebrahim Babaei
Faculty of Electrical and Computer Engineering University of Tabriz Tabriz, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :