An investigation on the mechanical properties of epoxy resin bisphenol F with different curing agents via FT-IR spectroscopy
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,937
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_355
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
Epoxy resins can be cured with a wide variety of curing agents. Aliphatic and aromatic polyamines, polyamides, and their derivatives are the commonly used amine type curing agents. In this paper, the influence of different curing agents on mechanical properties of epoxy composite was investigated. Therefore, the mechanical properties of epoxy resin based on diglycidyl ether of bisphenol F (DGEBF) in the presence of different curing agents was determined through tensile tests that were performed on dog-bone specimens. Moreover, in order to improve mechanical properties of composite and decrease costs, inorganic fillers such as calcium carbonate and mica in all of the specimens instead of pure epoxy resin were used.Finally, the interfacial interaction of epoxy resin containing different curing agents was characterized via Fourier Transform Infrared Spectroscopy (FT-IR) and confirmed by the tensile data. After complete curing process the epoxy composite contains polyamine curing agent displayed appreciable improving to mechanical properties. On the basis of obtained results, the strength of epoxy composite depends on the type of curing agent
کلیدواژه ها:
نویسندگان
Forouzan Gholamian
Faculty of Chemistry and Chemical Engineering, Malek Ashtar University of Technology,
Farideh Bataghva
Faculty of Chemistry and Chemical Engineering, Malek Ashtar University of Technology
Sara Ghariban
Faculty of Chemistry and Chemical Engineering, Malek Ashtar University of Technology
Zahra Ranjbar
department of Institute for Color Science and Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :