Evaluation of the Effect of Nonlinear Behavior of Gusset plate of HSS Diagonal Brace on the Performance of Steel Frame Under Cyclic Loading

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,247

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

QAEC02_057

تاریخ نمایه سازی: 19 تیر 1394

چکیده مقاله:

Recently the usage of concentrically braced frames (CBFs) are common for lateral-load resisting system in seismic design. In CBFs the braces are connected to the beam and column by gusset plate connection. Recent researches show that the seismic behavior of CBFs can be improved by considering yielding in the gusset plate in the performance levels. This study has indicated that buckling capacity of CBFs under a cyclic loading can be promoted by considering the behavior of gusset plate through designing its thickness and observe the free bending line and thickness of edge stiffener by the commercial finite element software Abaqus. At first the finite element and experimental result have been verified, Finally it will show the CBFs performance depends on gusset plate connections. The results indicated that increasing the thickness of gusset plate has the most effect on tolerable load of frame and promote stiffness and performance of braced frame.

کلیدواژه ها:

نویسندگان

Bahador Marghoob

Assistant Professor of Civil Engineering, Faculty of Loghman Hakim Institute

Javad Amiri

MS Student of Structural Engineering, Loghman Hakim Institute,

Hamed Roohbakhsh

MS Student of Structural Engineering, Shiraz University

Amir Etezadi

PhD Student of Structural Engineering, Shiraz University

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • ;139_48. Third Quarter, 1984. ...
  • Whitmore R.E., (1952), "Experimental Investigation of Stresses in Gusset Plates", ...
  • Irvan, W.G., (1957). "Experimental Study of Primary Stresses in Gusset ...
  • Hardin, B. O. (1958), "Experimental Investigation of the Primary Stress ...
  • Lavis, C. S. (1967), "Computer Analysis of the Stresses in ...
  • Vasarhelyi, D. D. (1971), "Tests of Gusset Plate Models, " ...
  • Bjorhovde, R. and Chakarbarti, S.K.. 1985. "Tests of Full-Size Gusset ...
  • Hardash, S.G. and Bjorhovde, R., 1985. "New Design Criteria for ...
  • Williams, G.C. and RiCHard, R.M. _ 1986.:Steelv Connection Design based ...
  • Constructional Steel Research 1987:58:1 143_59 ...
  • and the design of the compressive strength of steel gusset ...
  • Pawtucket, RI: Hibbitt, Karlsson & Sorensen, Inc; 2003. ...
  • failure analysis of special concentrically braced frame tests, ASCE, Journal ...
  • components of steel structures". Applied Technology Council; 1992. ...
  • (IL): American Institute of Steel Construction; 2005. ...
  • Sheng N, Yam CH, Iu VP. "Analytical investigation and the ...
  • Brown.V.L.S, (1988), "Stability of gusset conmectioms in steel structures ", ...
  • ABAQUS, standard user's manual version 6.3. Pawtucket, RI: Hibbitt, Karlsson ...
  • Yoo JH, Roeder C, Lehman D. FEM simulation and failure ...
  • ATC 24. "Guidelines for cyclic seismic testing of components of ...
  • AISC. Steel construction mamual. 13th ed. Chicago (IL): American Institute ...
  • نمایش کامل مراجع