Application of Central Composite Design for removal of Cr (VI) from aqueous solution using Chitin/ MCM-41: an effective nanocomposite
محل انتشار: کنفرانس بین المللی پژوهش های نوین در علوم مهندسی
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 603
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
RKES01_118
تاریخ نمایه سازی: 21 شهریور 1395
چکیده مقاله:
In the present study, a series of Chitin/ MCM-41 as nanocomposites were made in order to remove Cr (VI) ion from aqueous solution. The nanocomposite were characterized by FTIR, XRD and SEM. The surface area, pore volume and the pore size distribution of the Chitin/ MCM-41 were calculated by BET technique. Response surface methodology (RSM) approach using Central Composite Design (CCD) is applied to develop mathematical model and optimize process parameters for Cr (VI) removal.The effects of different parameters such as initial solution pH, initial Cr (VI) concentration, adsorbent dose and contact time on adsorption were studied to find the best operating conditions. Analysis of variance (ANOVA) showed the Initial solution pH and adsorbent dose were the most influential parameters. Higher removal efficiency was obtained at pH lower than 2.
کلیدواژه ها:
نویسندگان
Abbas Teimouri
Chemistry Department, Payame Noor University, 19395-3697, Tehran, Islamic Republic of Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :