Performance characterizations of particleboards made with wheat straw and waste veneer splinters
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,047
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SADHE02_125
تاریخ نمایه سازی: 3 آذر 1392
چکیده مقاله:
The aim of this study was to determine the performance of three-layer particleboard made from wheat straw and veneer splinters, as waste materials. For the purpose ofevaluation, compositions of wheat straw and beech veneer splinters at different mixture rates were compared for some of properties. Physical (thickness swelling and waterabsorption) and mechanical properties (modulus of rupture, modulus of elasticity, internal bond and impact strength) of the boards were evaluated. Effects of mixing ratios of fibrous material and press temperature on the above-mentioned propertieswere also investigated. The mixing ratios of beech veneer with wheat straw were 100:0%, 75:25%, 50:50%, 25:75% and 0:100%, respectively. A commercial ureaformaldehyde(UF) adhesive was used as binder. A total of 10 experimental boards with an average target density of 0.70 g cm-3 across all mixtures were fabricated. Allthe mechanical and physical properties of the boards were improved when the presstemperature was increased from 140 to 170 °C. Analysis of data revealed that themechanical properties were significantly different among the board types. With theexception of modulus of elasticity, the other properties were decreased by the addition of wheat straw particles. In general, water absorption and thickness swelling decreased with the increase of wheat straw content. The presence of wheat straw in the particleboards resulted in higher water absorption and thickness swelling. Finally, it can be stated that wheat straw and beech veneer splinters have potential as supplementfibrous materials, in combination with wood particles for particleboard manufacturing and indoor applications.
کلیدواژه ها:
نویسندگان
Khadijeh Azizi
Department of Wood and Paper Science and Technology, Islamic Azad University (IAU), Karaj Brach
Taghi Tabarsa
Department of Wood and Paper Technology, Gorgan University of Agricultural Sciences & Natural Resources
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :