PASSIVE CONTROL OF STEEL BRACED FRAMES USING DUCTILE KNEE ELEMENTS

سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,055

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

SEE05_311

تاریخ نمایه سازی: 25 شهریور 1385

چکیده مقاله:

Hysteretic dampers as the most practical passive control methods have improved the seismic performance of steel structures through energy dissipation induced by large inelastic deformations. Among them in this paper, KBF (Knee Braced Frame), a special form of braced frame having a diagonal brace connected to a knee element instead of beam-column joint, is investigated. In such systems, the knee element designed to have inelastic behavior for dissipating seismic energy caused by stro ng earthquakes. In this paper, first, experimental investigation of cyclic performance of a knee braced single span one-story frame specimen is described and experimental results are verified through non-linear finite element analysis procedure. The test results have shown good behavior of knee member before its failure and also indicated a number of important considerations for seismic design of KBFs. Moreover, a mathematical model has been derived to predict the bilinear behavior of the KBFs. Acceptable conformity between mathematical and numerical model proved the accuracy of the proposed model.

کلیدواژه ها:

Passive control ، Cyclic behavior ، Knee Braced Frames ، Non-linear finite element analysis ، Mathematical model

نویسندگان

Meysam Jalali

MSc Graduated of Earthquake Engineering, School of Civil Engineering, University of Tehran, Iran

Mehdi Zahrai

Associate Professor, School of Civil Engineering, University of Tehran, Iran

Rasoul Mirghaderi

Associate Professor, School of Civil Engineering, University of Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • American Institute of Steel Construction (AISC), 1997. Seismic provisions for ...
  • ANSYS (Revision 5.4), 1992, User 's Manual, Theory, Swanson Analysis ...
  • Ari stiz abal-ochoa, J.D., 1986. Disposable knee bracing: improvement in ...
  • Balendra, T., E.L. Lim and S.L. Lee, 1994. Ductile knee ...
  • Balendra, T., M.T. Sam, C.Y. Liaw and S.L. Lee, 1991. ...
  • Bruneau, M., C.M. Uang, and A. Whittaker, 1998. Ductile Design ...
  • FEMA, 2000. Recom mended Seismic Design Criteria for New Steel ...
  • Jalali, M., 2006. Improvement of seismic behavior of braced frames ...
  • Krawinkler, H., 1978. Shear in beam-column joints in seismic design ...
  • Roeder, C.W. and E.P. Popov, 1978. Eccentrically braced steel frames ...
  • Zahrai, S.M., 2006. Use of shear panel for passive control ...
  • Zahrai, S.M. and M. Bruneau, 1999. Cyclic testing of ductile ...
  • Zahrai, S.M. and A. Moslehi Tabar, 2006. Cyclic Behavior of ...
  • نمایش کامل مراجع