Experimental Study on the Influence of Inherent Anisotropy on the Behavior of Sands and Sand-Steel Interfaces
محل انتشار: دومین کنفرانس ملی مکانیک خاک و مهندسی پی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 579
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SMFE02_536
تاریخ نمایه سازی: 27 بهمن 1394
چکیده مقاله:
Experimental studies have shown that anisotropic sands behave differently when direction of loadingchanges with respect to the bedding plane. Recently, direct shear device has been re-considered as aninexpensive means to study the outcome of fabric anisotropy on soils response. In this paper, direct shearsamples with bedding plane orientation angles 0°, 15°, 30°, 45°, 60°, 75°, 120°, 135°, 150°, and 165°measured with respect to the shearing plane were prepared using an adjustable table. Inspection of directshear tests indicates that the peak shear strength and volume change response of initially anisotropic sandare highly influenced by inherent anisotropy. However, a unique residual friction angle was obtained. Forthe interfaces between dense sand and rough steel plate, it is observed that inherent anisotropy has anegligible influence on the peak and residual shear strengths and the volume change response.
کلیدواژه ها:
نویسندگان
Benyamin Farhadi
MSc Student, Department of Civil and Environmental Engineering, Shiraz University of Technology, Iran
Ali Lashkari
Associate Professor, Department of Civil and Environmental Engineering, Shiraz University of Technology, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :