Study on α- diimine ligand backbone in 1-hexene polymerization using late transition metal catalysts
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 690
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
TCPCO03_086
تاریخ نمایه سازی: 16 شهریور 1395
چکیده مقاله:
Two Nickel-based catalysts of 1,4-bis(2,6-diisopropylphenyl)-butanediiminedichloro-nickel(II) (1a) and 1,4-bis(2,6 diisopropylphenyl)-acenaphthenediiminedibromo-nickel(II) (2a) was used in polymerization of 1-hexene. In order to study on the influence of reaction condition ([Al] /[Ni] molar ratio) and structure effect of catalyst (diimine backbone) on the activity and average molecular weight (Mv), experiments performed under identical manner. The results revealed that catalyst 1a produced poly (1-Hexene) with higher Mv and less activity than catalyst 2a using DEAC (diethylaluminium chloride) and ethylaluminum sesquichloride (EASC) as cocatalysts. Also the highest activity obtained for both catalysts using DEAC at [Al]/[Ni]=700. In addition, EASC demonstrated higher activity than DEAC at the same polymerization conditions for each catalyst
کلیدواژه ها:
نویسندگان
S Avar
Department of Catalyst, Iran Polymer and Petrochemical Institute, Tehran, Iran
M KhoshSefat
Department of Catalyst, Iran Polymer and Petrochemical Institute, Tehran, Iran
M Karimi
Department of Catalyst, Iran Polymer and Petrochemical Institute, Tehran, Iran
S. M. M Mortazavi
Department of Catalyst, Iran Polymer and Petrochemical Institute, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :