Industrial techniques for elimination of erosion corrosion in heat exchanger tubes

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,032

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

TOIL01_016

تاریخ نمایه سازی: 4 اسفند 1389

چکیده مقاله:

Shell and tube design is the most usual type of heat exchangers in oil refineries and other large chemical processes. Due to their applications there are various failures that may occur in these equipments. One of the most common failure reasons is erosion/corrosion problem in the tube section. Different factors affect this type of corrosion such as:particle size, flow velocity,flow direction and turbulence. Several researches have been carried out to eliminate or control erosion/corrosion in heat exchangers Efficiency of different proposed methods are improved if the major parameters connected with erosion are carefully determined.Among of proposed techniques it is recommended to use the method that is consonant with equipment situation and its application It is also necessary to assist on economical aspect and select a technique that is not expensive.This paper discusses various techniques that are meant to remove or control erosion/corrosion in tube section of heat exchangers. Moreover,roles of various parameters and their solution procedure is investigated.

کلیدواژه ها:

نویسندگان

Bahram Borooghani

Technical Inspection Engineering Department, Petroleum University of Technology, Abadan,

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • . Robert J.K. Wood, Ero sion-corrosion interactions and their effect ...
  • . B. Kuznicka, Ero sion-corrosion of heat exchanger tubes, Institute ...
  • . Anees U Malik, Saleh A. Al-Fozan and Mohammad A ...
  • . N.W. Polar, M.A. Heine, J.M. _ and C.J. Gaffoglio, ...
  • . George Lai _ Ero sion/Corrosion Behavior of Weld Overlays ...
  • . Corrosion Examples and Preventive Measures ...
  • .managing galvanic corrosion, printed with permission from NACE international presented ...
  • . G. Pimenta, Instituto de Soldadura e Qualidade, Portugal, Ero ...
  • for industril applications, Printed in USA _ 1997 Titanium M ...
  • .- brasses for corrosion resistance, Guide to Engineered Materials, Section ...
  • . M Zaparel Awang, Growing challenges of heat exchanger's operation ...
  • . Dr. Abdelmounam M. Sherik, Abduljalil H. Al-Rasheed, Hassan Al-Ajwad, ...
  • The /Notional conference for Technology Development in Oil, Gas, Petro ...
  • . http ://www.hse. go V , uk/c _ m ah/ ...
  • نمایش کامل مراجع