A new technique for determination of the constants of Zerilli-Armstrongmaterial model at high strain rates and elevated temperatures
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,014
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_017
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
Material models are widely used in finite element codes for analysis of material deformations particularly at high strain rates and elevated temperatures. The problems such as necking and bulging limit the conventional test techniques to measure the stress-strain curves only up to small strains. This is while, in some deformation processes, the strain can be greater than 1. In this work, steel shots of 6 mm in diameter are impacted on specimens at high impact velocities and at elevated temperatures using shot impact test. The geometry of the crater created by a shot impact on the specimen is used for determination of the constants of Zerilli-Armstrong material model. A combined experimental,numerical and optimization approach is used for determination of the constants. With this new technique, stress-strain curves are no longer needed to be obtained by experiment at high strain rates and elevated temperatures.
کلیدواژه ها:
نویسندگان
Gholam-Hussain Majzoobi
Professor
Alireza Hosseinkhani
M.S student
Saeed Lahmi
M.S Student, Mechanical Engineering Department, Bu-Ali Sina University, Hamedan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :