Experimental Investigation of the Polyurethane Foam Cross-section Effect on the Quasi-static Lateral Compression Process
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 984
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_019
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
This paper studies the effect of geometrical shape of the polyurethane foam cross-section under the lateral compression on the energy absorption capability, specific absorbed energy, mean force and maximum lateral force, in the quasi-static condition by the experimental method. For this purpose, some polyurethane foam specimens were prepared with the different shapes of cross-section such as equilateral triangle, rectangle, square, equilateral hexagon, and circle. All the specimens have the same cross-sectional area, length, density and mass. The experiments were performed by a DMG machine, Model 7166 by compressing the foam samples between two rigid platens, laterally. The experiments indicate that the specimens with the square and equilateral hexagonal cross-sections have the best energy absorption performance; and the equilateral triangular specimen has the worst energy absorption behavior. Also, there is an interesting order among the values of investigated parameters such as total absorbed energy, specific absorbed energy (SAE), and mean and maximum lateral load which sorted from the minimum to maximum: equilateral triangular cross-section, circular cross-section, equilateral hexagonal cross-section, and finally, square cross-section. Another attractive phenomenon is observed in comparison of two specimens with the rectangular cross-sections which laterally tested in two different directions, longitudinal and latitudinal sides of cross-section. The comparison shows that the SAE by the longitudinal side compressed specimen is higher than the latitudinal side compressed specimen; but, the mean and maximum lateral loads have an inverse trend.
کلیدواژه ها:
نویسندگان
A Niknejad
Assistant Professor
M Firouzi
PhD Student, Mechanical Engineering Department, Yasouj University, P. O. Box: ۷۵۹۱۴-۳۵۳, Yasouj, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :