Analysis of Chatter in Tandem Rolling Mills based on Coulomb Model
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,026
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_034
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
Cold rolling is the most vital process in manufacturing flat sheet products. During the cold rolling of thin metal sheets, undesired mechanical vibrations, generally referred to as chatter, are often generated. It usually lowers the surface finish of the sheet and in some cases causes gauge variation. It may also cause severe damage to the rolling mill and strip rupture under extreme conditions. In this research, a chatter model in tandem rolling mills is proposed based on the friction coefficient model or the Coulomb model. To study chatter in rolling, it is necessary to set up models for the rolling process as well as the mill stand. The model relaxes certain assumptions, by considering the influence of the material strain-hardening effect and the elastic deformation of the work roll. The results of the simulation are verified by comparing to experimental data obtained from a full scale industrial mill. The main chattering characteristic, i.e., the critical rolling speed, obtained from the simulation program has been found to be in good agreement with that of the experimental measurements.
کلیدواژه ها:
نویسندگان
A Heidari
PhD Student
M. R Forouzan
Associate Professor
S Akbarzadeh
Assistant Professor, Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, ۸۴۱۵۶-۸۳۱۱۱, Iran,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :