Experimental Investigation of Folding of Rubber-Filled Circular Tubes

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 745

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH02_073

تاریخ نمایه سازی: 21 تیر 1393

چکیده مقاله:

In this paper, mechanical behaviors and energy absorption capacities of empty and rubber-filled brazen circular tubes under quasi-static axial loading have been investigated, experimentally. The specimens were cutout of commercially available brazen circular tubes with the same length and diameter. Some of the specimens were filled by rubbers with three different shores and also an empty tube was prepared. Load-displacement diagrams and energy absorption of specimens were extracted from experimental data. The results show that filling the brazen tubes with rubber causes those to absorb more energy and the amounts of energy absorption are increased by increasing the rubber shore. Also, the deformation of tubes filled with lower rubber shore is more asymmetrically, in contrast with the empty ones.

نویسندگان

M. S Saeedi Fakher

MSc Student

J Rouzgar

Assistant Professor, Department of Mechanical and Aerospace Engineering, Shiraz University of Technology, ۷۱۵۵-۳۱۳, Shiraz, Iran

H Assaee

Assistant Professor, Department of Mechanical and Aerospace Engineering, Shiraz University of Technology, ۷۱۵۵-۳۱۳, Shiraz, Iran

A Niknejad

Assistant Professor, Department of Mechanical Engineering, Yasouj University, ۱۶۸۴۶-۱۳۱۱۴, Yasouj, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Abramowicz, W. and Jones, N. (1984), Int J Impact Eng ...
  • Abramowicz, W. and Jones, N. (1986), Int J Impact Eng ...
  • Gupta, N. K. and Sekhon, G.S. (2002), Int J Impact ...
  • Niknejad, A. et al. (2012), Materials and Design 36, 24-34. ...
  • Niknejad, A. et al. (2013), Thin-Walled Structures 72, 48-60. ...
  • Niknejad, A. and Moeinifard, M. (2012), Materials and Design 40, ...
  • Mamalis, A.G. et al. (1998), Int J Impact Eng 8, ...
  • Zhang, Z. et al. (2011), Thin-Walled Structures 49, 1071-1079. ...
  • Alavi Nia, A. and Hamedani, J. H. (2010), Thin-Walled Structures ...
  • Reddy, T. Y. and Wall, R.J. (1988), Int J Impact ...
  • Thornton, P. H. (1980), SAE paper 81. ...
  • Seitzberger, M. et al. (1997), Acta Mech 125, 93-105. ...
  • Reddy, T. Y. and Al-Hassani, S.T. (1993), Int J Mech ...
  • نمایش کامل مراجع