Experimental analysis of tool drop with repeated impact on GLARE plate

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 719

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH02_089

تاریخ نمایه سازی: 21 تیر 1393

چکیده مقاله:

In reality, a tool drop on structure is a repeated impact phenomenon, in which the impact energy is gradually reduced by time in successive impact. In this study, tool drop is experimentally investigated on Glare 3 and Glare 5 plates with the stacking sequence of [Al/0/90/Al/90/0/Al] and [Al/0/90/90/0/Al], respectively. In tool drop, the impact energy is the rebounding energy of the previous impact. Repeated impacts are conducted using dropped weight equipments and force-time and force-displacement results are obtained. It is observed that only the first impact influences the plate for the repeated impact of the tool drop since the impact energy is reduced in successive impacts and no effects can be observed significantly for damage area and type. In other words, in tool drop on Glare 3 and 5 only the first impact is important.

کلیدواژه ها:

نویسندگان

R Ghajar

Professor, Faculty of Mechanical Engineering, K.N.Toosi University of Technology, ۱۹۳۹۵- ۱۹۹۹, Tehran, Iran

S. M. R Khalili

Professor, Faculty of Mechanical Engineering, K.N.Toosi University of Technology, ۱۹۳۹۵- ۱۹۹۹, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Gunnink, J.W. et al. (2002), Applied Composite Material, 9, 201-219. ...
  • Vlot, A. et al. (1999) Aircraft Engineering Aerospace Technology 71, ...
  • Afaghi-khatibi, A. et al. (2000) Composite Materials 2, 249-290. ...
  • Vermeeren, C.A.J.R. (2003), Applied Composite Material 10, 189-205. ...
  • Alderliesten, R.C. and Homan, J.J. (2006), International of Journal of ...
  • Alderliesten, R.C. et al. (2003), Applied Composite Material 10, 223-242. ...
  • Vlot, A. and Gunnink, J. (2001), Dordrecht, Boston, Kluwer Academic ...
  • Vlot, A. (1993), Composite Engineering 3, 911-927. ...
  • Abdullah, M.. and Cantwell, W.J. (206), Composite Science and Technology ...
  • Caprino, G. et al. (2004), Compos Part A 35, 605-616. ...
  • Rajkumar, G.R. et al. (2012), JMEPEG 21(7), 1485-1490). ...
  • Rajkumar, G.R. et al. (2012), International Journal of Soft Computational ...
  • Moriniere, F.. et al. (2012), Central European Engineering 2(4), 603-611. ...
  • Y armohammad Tooski, M. et al. (2013), Composite Structure 99, ...
  • نمایش کامل مراجع