Experimental Analysis of Energy Absorption and Deformation ofFoam-Filled Thin-Walled Tubes With Various Section Geometry

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 815

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH02_117

تاریخ نمایه سازی: 21 تیر 1393

چکیده مقاله:

In the present research, effects of foam filling on the deformation and energy absorption capacity of thin-walled aluminum tubes with various section shapes (circular, square, triangular) and 2 mm thickness, are investigated experimentally. The tubes were the same volume, height, average section area and material and were subjected to axial dynamic loading. Poly Styrene (grade 2), Polyurethane, Polyethylene and Unolit foams were used in experiments. The experiments were carried out by Drop Hammer apparatus in Bu-Ali Sina University.The results show that the section geometry and foam filling have a considerable effect on the energy absorption capacity, mean crushing load and maximum load. Investigating both parameters including section geometry and foam filling showed that circular tubes have the greatest energy absorption capacity, mean crushing load and maximum load among all various sections; furthermore, Unolit-filled tubes have the best performance among the foam-filled ones. On the other hand, in the same conditions, triangular tubes and Polyethylene-filled tubes have the least energy absorption capacity, mean crushing load and maximum load among the tested specimens. It was concluded that the circular tubes filled by Unolit foam have the most energy absorption capacity and mean crushing load, while the triangular tubes filled by Polyethylene foam have the least energy absorption capacity and mean crushing load. A remarkable improvement in energy absorption characteristics of the specimens was observed because of the foam filling. In addition, the foam affects the folding paradigm.

نویسندگان

A Alavi Nia

Associate Professor

V Zareie

MSc Student

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Santosa SP. (1997), Presented at the Meeting of the Joint ...
  • Hanssen AG, Langseth M. (1996), Presented to the No reg ...
  • Hanssen AG, Langseth M, Hopperstad OS. (1998), International Journal of ...
  • Seitzberger M, Rammerstorfe FG, Degischer HP, Gradinger R. (1997), Acta ...
  • Thornton PI (1980), SAE paper 800081. ...
  • Lampinen BH, Jeryan JA. (1982), SAE paper 820494. ...
  • Reid SR, Reddy TY, Gray MD. (1986), International Journal of ...
  • Thorton PM, Mahmood HF, Magee CL. (1983), Energy absorption by ...
  • Santosa SP, Wierzbicki T (1998), Computers Structures 68(4), 343-68. ...
  • Santosa SP, Wierzbicki T (1997), International Journal _ Crashwo rthiness ...
  • Santosa SP, Wierzbicki T. (1998), International Journal of Mechanical Sciences. ...
  • Hanssen AG, Langseth M, Hopperstad OS. (2000), International Journal of ...
  • Seitzberger M, Rammerstorfe FG, Gardinger R, Degischer HP, Blaimschein M, ...
  • Hanssen AG, Langseth M, Hopperstad OS. (2000), International Journal of ...
  • Guillow SR, Lu G, Grezbieta RH. (2001), International Journal of ...
  • Lu G, Yu T. (2003), Energy absorption of structures and ...
  • Yuen Schung Kim, Nurick GN, Starke RA. (2008), Intermational Journal ...
  • Guo LW, Yu JL, Li ZB. (2010), Acta Mechanica 213, ...
  • Guo LW, Yu JL. (2010), Journal Experimental Mechanics 25(3), 8-271. ...
  • Guo LW, Yu JL. (2011), International Journal of Impact Engineering ...
  • نمایش کامل مراجع