Determination of Stress Intensity Factors for In-plane Mixed-Mode FractureToughness Tests by Using a New Loading Device
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,023
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_122
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
Determination of materials fracture properties is one of the most important objectives in fracture mechanics and design of structures. In most actual applications, in-plane loading conditions, consists of tensile (mode I), shear (mode II) and combination of tensile and shear modes (mixed-mode). There are various methods for testing fracture specifications of materials. Arcan test fixture is widely used for mixed-mode fracture tests of the isotropic and composite materials because of its simplicity and using of the similar specimens in the experiments. Disadvantages of Arcan fixture such as asymmetry in inplane loading and limitations of changing the angle of loading have been solved by designing and using a new loading device. In this paper, the stress intensity factor functions for pure mode I, mode II and mixed-mode fracture toughness tests are analyzed with finite element method. The results are validated for compact tension (CT) standard specimens.
کلیدواژه ها:
نویسندگان
N Choupani
Associate Professor
M Shameli
PhD Student
A Es'hagi Oskui
Postgraduate Student, School of Mechanical Engineering, Sahand University of Technology, Sahand, Tabriz, ۵۱۳۳۵-۱۹۹۶, Iran,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :