Determination of cohesive fracture parameters of compacted clay beams
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 921
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_143
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
In this investigation the fracture parameters of compacted clay specimens has been obtained. Three point bend tests were used to find the fracture parameters of compacted clay specimens. One of the characteristics of these tests is that instead of a stress-controlled method a displacement controlled one has been used. Therefore by using these tests the softening portion of the load-displacement curve was obtained. By comparing the loaddisplacement curves obtained from a finite element analysis with the ones obtained from the experiments the desired fracture parameters have been calculated. It was also noted that by using a linear softening law for the cohesive zone model a very good agreement between experimental and numerical results has been achieved.
کلیدواژه ها:
cohesive fracture parameters ، three point bend test ، displacement controlled method ، finite element analysis
نویسندگان
J Asadifallah
Graduate Student
O. R Barani
Assistant Professor
M Mirzanejad
Graduate Student
M Mohammadbeigi Salahshour
Graduate Student
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :