Design and manufacturing of new a fire retardant coating system for polymer composites

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 504

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH03_008

تاریخ نمایه سازی: 26 شهریور 1395

چکیده مقاله:

The purpose of this study is manufacturing of a coating system for protecting polymer composites against the direct flame. The main effort was focused on production of an optimum composition for the coating system which is also supposed to reduce the amount of heat transfer to the composite substrate. Moreover, it is worth mentioning that the temperature of the rear of the coated surface of composites should not exceed of 125 ℃ in 30 minutes. Investigations have been done for two systems; water based and resin based coating systems. Fire tests results illustrated that the resin based coating systems have a higher resistance than the water based one. The resin based coating system consists of intumescent and metal hydroxide coating systems. Fire tests have been done for three coating systems; intumescent coating system, metal hydroxide coating system and a combination these two systems. Results revealed that the combination of the two coating systems (made of intumescent and metal hydroxide coating systems) has the best performance against fire.

نویسندگان

M. M. Shokrieh

Professor Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran

M Kheradpisheh

M.Sc. Student,Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran