Experimental Investigation of Cold Metal Shaping of Circular Tubes into a Semicircular Section

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 488

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH03_011

تاریخ نمایه سازی: 26 شهریور 1395

چکیده مقاله:

This article investigates a new method of cold metal forming of aluminum tubes into semicircular sections, experimentally. For this purpose, some circular tubes were prepared and compressed between a rigid platen and a semicircular die in the lateral direction. The dies were machined by a CNC apparatus from the hardened steel; so, the dies are considered as a rigid body in comparison with the specimens. Four tubes with different outer diameters were shaped into the semicircular section profiles to study effects of tube diameter on the final product geometry and value of forming energy. For all the specimens, diagrams of forming energy versus lateral displacement were sketched. Also, the final shapes of the produced profile cross-section were compared. The results showed that final cross-section of the produced profiles is more similar to the desirable shape when tube diameter decrease; and undesirable curvature is considered in the specimens with larger diameters

نویسندگان

A Niknejad

Associate Professor, Mechanical Engineering Department, Yasouj University, P.O. Box 75914-353, Yasouj, Iran

P Boozanjani K.

Undergraduate Student, Mechanical Engineering Department, Yasouj University, P.O. Box 75914-353, Yasouj, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • . Wang, G., Zhang, K.F., Wu, D.Z., Wang, J.Z. and ...
  • . _ _ _ , Archives of Civil and Mechanicl ...
  • . Zohrabi, M.. Niknejad, A. and Ziaee, S., Thin-Walled Structures ...
  • . Niknejad, A. and Heidari Orojloo, P., Thin-Walled Structures 100, ...
  • Mass (g) 9.76 10.82 13.31 17.21 ...
  • نمایش کامل مراجع