A novel strategy to speed up FE modeling of Ultrasonic Assisted ECAP Process

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 520

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH03_050

تاریخ نمایه سازی: 26 شهریور 1395

چکیده مقاله:

One of great challenges in processing of materials using Equal Channel Angular Pressing (ECAP) is the high forming forces required to produce large shear deformation in the material. Researches show that friction forces between die and sample constitute great part of the total forming forces. In several researches it was reported that the application of ultrasonic vibrations can reduce the friction rate. However, these reports need more investigation to overcome some practical challenges of ultrasonic applications in ECAP process. In this study a novel strategy is offered in order to speed up the finite element simulation process without virtually rising of ram speed. Using this technique the FE modeling time is reducing considerably. The results clearly suggest to not using virtually higher speeds in FE modeling of vibrated ECAP process. This is because; unlike conventional ECAP process, the vibrated ECAP process is considerably sensitive to the velocity rate of the basic motion. The conclusion is conducted through comparing several simulations as well as analytical formulation with experimental data from literature.

نویسندگان

M Eskandarzade

PhD student, School of Mechanical Engineering, University of Tehran, Tehran, 14395515 Iran

A Masoumi

Associate Professor, School of Mechanical Engineering, University of Tehran, Tehran, 14395515 Iran

G. Faraji

Assistant Professor, School of Mechanical Engineering, University of Tehran, Tehran, 14395515 Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Faraji, G., Ebrahimi, M. and Bushroa, A., Materials Science and ...
  • Kumar, V. C., Hutchings, I. _ Tribology International, 37, pp. ...
  • Tsai, C. C. and Tseng, C. H., Archive of Applied ...
  • Djavanroodi, F. Ahmadian, H. Koohkan, K. Naseri, R., Ultrasonics, 53, ...
  • Littmann, W. Storck, H. and Wallaschek, J., in Proceeding o ...
  • نمایش کامل مراجع