Experimental Investigation of Contact Pressure Distribution in PEM Fuel Cells
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 673
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH03_100
تاریخ نمایه سازی: 26 شهریور 1395
چکیده مقاله:
This paper develops a PEMFC model to study the contact pressure distribution over the membrane electrode assembly using experimental setup and finite element method (FEM). Two-dimensional FEM model used to decrease the calculation time of the simulation. The simulation results have good agreement with experimental results obtained via pressure sensitive films. The experimental setup prepared for single cell and fifteen cells stack. Moreover, the effects of some parameters such as thickness of the end plates and position of the cell on the contact pressure distribution over the MEA were investigated. The results reveal that optimizing mentioned parameters leads to design PEMFCs with proper contact pressure distribution over the MEA.
کلیدواژه ها:
نویسندگان
E Alizadeh
Assistant professor, Malek-Ashtar University of Technology, Fuel Cell Technology of Research Lab
M Barzegari
PH.D. Student, Malek-Ashtar University of Technology, Fuel Cell Technology of Research Lab
M Momenifar
Senior Engineer, Malek-Ashtar University of Technology, Fuel Cell Technology of Research Lab