h radnia - Chemical Engineering Department, Babol University of Technology,P.O.Box ۴۸۴, Babol,Iran
a.a ghoreyshi - Chemical Engineering Department, Babol University of Technology,P.O.Box ۴۸۴, Babol,Iran
h youesi - Chemical Engineering Department, Babol University of Technology,P.O.Box ۴۸۴, Babol,Iran

Fe(II) removal from aqueous solution was investigated using chitosan as the adsorbent in a packed bed column. The effects of various operting parameters on breakthrough curve were studied. Steep breakthrough curves were observed at higher flow rates, higher inlet metal concentrations andlower bed heights. The breakthrough curves were analyzed to obtain the column characteristics. Removal efficiency, metal uptake capacity and mass transfer zone were estimated at different column conditions. Maximum uptake capacity of 59.6 mg g1 at bed height of 12 cm and maximumremoval efficiency of 56% at inlet metal concentration of 10 mg l-1 were obtained. Finally, Thomas and Yan models were applied to describe the experimental data. The model constantswere also estimated using a nonlinear fit to the expermental breakthrough data . Resultsdemonstrated that although correlation coefficients obtained by Yan model are higher, but the maximum uptake capacities predicted by Thomas model ,almost in all conditions, is in a closer agreement with the experimental ones

Adsorption, Breakthrough curve, Chitosan, Fe(II), Thomas model, Yan model