THE THERMOELASTIC STRESS ANALYSIS OF A GAS TURBINE BLADE WITH COOLING

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,597

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

AEROSPACE10_362

تاریخ نمایه سازی: 2 اسفند 1390

چکیده مقاله:

In some problems, the stress solution depends on a thermal solution without the inverse dependency. That means stress has no effect on the heat transfer solution. In current research the pure heat transfer problem has been solved as a predefined field for the purpose of stress analysis for a turbine blade with cooling. Since the blade is subjected to a hot pressurized flow which forces the rotor to rotate at its required speed therefore, the created stress by forces lead to fraction and corrosion on the blade. In this paper, temperature and stresses fields in a gas turbine rotor are investigated using finite element method (FEM). According to the complexity of the geometry, a two dimensional modeling of a group of blade is created using a commercial CAD software. The details of this new approach are presented while stresses developed due to the turbine operating conditions at high rotational speed and thermal gradient by taking into account the material behavior at elevated temperatures K(T), E(T), α(T).Finally, these results compared with the results of the material behavior at constant properties. The results of blade with constant material properties have a good agreement with experimental results

نویسندگان

Gholamali Atefi

Associate Professor of Mechanical Engineering Department of Mechanical Engineering, Iran University of Science and Technology, Narmak, Tehran, ۱۶۸۴۴, Iran

Mohammad Medhi Jafari

PhD. Student of Mechanical Engineering

Javad Khalesi

MSc. of Mechanical Engineering Department of Mechanical Engineering, Iran University of Science and Technology, Narmak, Tehran, ۱۶۸۴۴, Iran

Afsaneh Soleimani۴

MSc. of Mechanical Engineering Department of Mechanical Engineering, Iran University of Science and Technology, Narmak, Tehran, ۱۶۸۴۴, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Amr M.S. El-Hefny, Mustafa Arafa, Stress analysis of a gas ...
  • M. J.Hyder 1 and H.Rehman, Stress Distribution of the Gas ...
  • Fig. 14 (a) stress field at A-A section in pressure ...
  • Srinivasan J., Gowda R- M S. and Padrnanabhan R., A ...
  • Ron S. Bunker Cooling Design Analysis GE Global Research, One ...
  • Arvantis S. T., Symko Y. B. and Tadros R N., ...
  • Hepworth J. K., Wilson J. D., Ailen J. M. Quentin ...
  • Zboinski G., Physical and geomery non-linear in contact problems of ...
  • R. Hagmeijer, A. de Boer, Towards Integrated Analysis of Gas ...
  • AERO201 1, 1-3 march, 2011 ...
  • AERO201 1, 1-3 march, 2011 ...
  • Amagasa S., Shimomura K., Kadowaki M., Takeishi K., Kawai H., ...
  • Davinder Singh Delhelay, B.E, Nonlinear Finite Element Analysis of the ...
  • Publication Number SMC-045 Copyright @ Special Metals Corporation, 2007 (Sept ...
  • Stephen J. Balsone Buckets and Nozzles GE Gas Turbines LLC ...
  • TTER materil properties handbxok (article) File Code: ITER-AA01 -2102 ...
  • Allen, J. M., Effect of Temperature Dependent Mechanical Properties on ...
  • نمایش کامل مراجع