GROWTH AND COLLAPSE OF A CAVITATION BUBBLE INSIDE A RIGID CYLINDER: EFFECT OF MEMBRANE TENSION
محل انتشار: شانزدهمین کنفرانس بین المللی انجمن هوافضای ایران
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 507
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
AEROSPACE16_082
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
In this paper, growth and collapse of a cavitation bubble inside a rigid cylinder with a compliant coating (a model of human’s vessels) are studied using Boundary Integral Equation and Finite Difference Methods. Thefluid flow is treated as a potential flow and Boundary Integral Equation Method is used to solve Laplace’s equation for velocity potential. The compliant coating is modeled as a membrane with a spring foundation. Atthe interface between the fluid and the membrane, the pressure and normal velocity in the flow are matched to the pressure and normal velocity of the membrane using linearized condition. The effects of the parametersdescribing the flow (the fluid density, the initial cavity size and its position) and the parameter describing the compliant coating (membrane tension) on the interaction between the fluid and the cylindricalcompliant coating are shown throughout the numerical results. It is shown that the bubble life time slightly decreases by increasing membrane tension
کلیدواژه ها:
نویسندگان
Amireh Nourbakhsh
Department of Mechanical Engineering, Bu-Ali Sina University, Hamedan, Iran