Wing Area And Engine Thrust Estimation For Airplanes With Advanced Alloys And Materials
محل انتشار: شانزدهمین کنفرانس بین المللی انجمن هوافضای ایران
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 506
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
AEROSPACE16_210
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
Reducing the weight of the aircraft is one of the most important issues of airplane design. Using advanced materials such as AL/LI and composite would decrease the weight of the aircraft and is one of the solutions. This paper determines the effect of using such materials (instead of the classical Aluminum) in aircrafts Wing area(S( and engine thrust(T) required. Our method includes the consideration of weight reduction effect of advanced alloys and materials in airplane structural module and modeling it into airplanes take off weight. Our case study addressed an indigenously designed jet transport of 186 passenger and 4000 km range (A-320 class). As a result the application of Composite in the wing, reduced the engine thrust required about 9.04%. This thrust reduction has only 1.18% error relative to the practical application of composite in the B-777X wing.
کلیدواژه ها:
Composite-Weight reduction-Wing area-engine thrust
نویسندگان
Mohammad Ali Vaziri
Aerospace Engineering Dept. AmirKabir University of Technology, Tehran, Iran Professor of Aircraft Design
Mohammad Azadian
Aerospace Engineering Dept. AmirKabir University of Technology, Tehran, Iran MSC student
Sayyed Basir Ajelleh
Aerospace Engineering Dept. Malek Ashtar University of Technology, Esfehan, Iran MSC student