Durability assessment of asphalt mixtures by anti stripping additives

سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,291

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

BITUMEN01_006

تاریخ نمایه سازی: 10 فروردین 1387

چکیده مقاله:

This report summarizes research involving the comparison of new additive materials for binder to reduce water damage of asphalt concrete. The study was a cooperative effort between the Engineering and civil organization of Tehran municipality and Paral Kish and Tarahan Ghir Novin companies. Fabricated asphalt specimens, which were made by two kinds of anti stripping materials, one type of asphalt cement and three types of aggregate, were examined according to SHRP test method and evaluated by constructing asphalt mixtures in the laboratory. Moisture damage is a complex phenomenon that involves thermodynamic, chemical, physical and mechanical processes. The interaction between bitumen and aggregate is a primary determinant of asphalt mixture strength; not only is adhesion between bitumen and aggregate related to the aggregate, but it is also a bitumen property. To achieve this objective, 6 different HMA combinations using different mix parameters and different anti stripping agents (with acidic and basic basis) were evaluated for their resistance to moisture conditioning and using the modified Texas Boiling test. A laboratory investigation of stripping of asphalt mixtures has been performed using the Marshall - Immersion test. Marshall specimens were prepared at optimum asphalt contents were exposed to freezing–thawing conditioning according to AASHTO T283. The results indicate that aggregate type has a dominant influence on the bitumen aggregate bond. Nevertheless results revealed that anti stripping additives has improved stability and stiffness of bituminous mixtures, because the adhesive forces between asphalt and aggregate and the mechanical interlock between aggregate particles have been improved due to treatment.

کلیدواژه ها:

Modifier ، Lottman procedure ، Immersion-Compression ، percent retained strength ، antistripping additives or agents ،

نویسندگان

Masood Nasr Azadani

Executive of Engineering and civil organization of Tehran municipality

Hamid Sabbagh Mollahosseini

Executive of Engineering and civil organization of Tehran municipality

Ershad Amoosoltani

Academic membership of Science and Technology of Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Yong-Rak Kim and Jamilla Sudo Lutif, "Material Selection and Design ...
  • Gore Ray, "Effect of anti stripping additives on PG grades ...
  • "Laboratory Evaluation of Anti-Strip Additives in Hot Mix Asphalt", CLEMSON ...
  • Mansour Solaimanian and Thomas W. Kennedy, "Precision of the moisture ...
  • David Jonse IV, Alan James, Anne Stonex "Moisture Sensitivity of ...
  • Edith Arambula, Amit Bhasin, Veronica Castelo Branco, Jonathan Howson, Dallas ...
  • Bhasin, A., Masad, E., Little, D. N., and Lytton, R. ...
  • Tom K. Deddens, John Hinrichsen, Rebecca McDaniel, "Hot Mix Asphalt ...
  • نمایش کامل مراجع