Study of three burner configurations and their effect on pollutant emission characteristics of the furnace
محل انتشار: پنجمین همایش ملی مهندسی محیط زیست
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,131
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CEE05_405
تاریخ نمایه سازی: 2 شهریور 1390
چکیده مقاله:
In diffusion combustion systems, turbulent mixing of the oxidant (usually air) with fuel is affected by the burner design. Enhanced mixing process can help to tailor the performance of the flame and pollutant emission characteristics of the furnace. Hence making any changes to the burner configuration might lead to higher thermal efficiency and lower pollutant emissions. These are crucial because of the limited fossil fuel supplies of the earth and its delicately balanced environment. In the present work, three different methane burners and the corresponding pollutant emissions are studied numerically. Heat transfer rate along with NOx and CO emissions from the furnace in the three cases are compared. Combustion in a natural gas-fired furnace is simulated to verify the simulation methodology and the solution algorithm and results are compared with those of the existing references. According to the results, even small changes to the burner design can dramatically change pollutant emission levels
کلیدواژه ها:
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :