Cement stress analysis of cement reinforced with polymer nanocomposites with several cylindrical holes using finite element
محل انتشار: چهارمین کنفرانس ملی صنعت سیمان و افق پیش رو
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 414
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CEMENT04_038
تاریخ نمایه سازی: 30 دی 1397
چکیده مقاله:
Due to the widespread use of composite materials as well as porous materials in various industries, an accurate examination of the distribution of stress in this type of material is essential. In this paper, the distribution of stress in an unlimited tube with cylindrical holes has been investigated; For this purpose, the finite element method was used and the Abacus software was used to distribute the stress in different directions in the pipe with two different types of arrangement from the cylindrical holes in the tube. For further review, the results of this simulation were compared with the results in other papers. In the results section, the change in the distance between the holes in the tube has an effect on stress distribution in different directions; also, the amount of stress variation has been investigated in different directions along the tube.
کلیدواژه ها:
نویسندگان
Peyman karimi
Master of Mechanics, Shahrekord, Iran, Shahrekord Cement Mechanical Engineer
Behnam Mokhtarian Dehkordi
Master of Mechanics, Shahrekord Branch, Islamic Azad University, Shahrekord, Iran