Investigation of the effect of cement strength class on cement mortar porosity using sample cross-sectional images
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 520
فایل این مقاله در 6 صفحه با فرمت PDF و WORD قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CEMENT05_043
تاریخ نمایه سازی: 5 آذر 1398
چکیده مقاله:
Production of cementitious materials with proper performance-as one of the most widely used structural materials-requires an understanding of its physical and mechanical properties that are affected by the constituents and mixing ratios. In this study, using cement mortar surface imaging in two different water-to-cement ratios, the effect of cement strength on the cavities and porosity of cement mortar samples is investigated. Comparison of the results of porosity using the cross-sectional imaging method and the experimental method shows a striking resemblance. Using cross-sectional sampling is a straightforward approach to estimate porosity. The results highlight that the porosity decreases by increasing the cement strength class from 32.5 to 52.5 MPa and decreasing the water-to-cement ratio from 0.5 to 0.3.
کلیدواژه ها:
نویسندگان
Ali Asghar Sadeghi
Assistant Professor of Faculty of Engineering, civil gourp, Hakim Sabzevari University
Sahar Bayat
MSc Student of Structures, Hakim Sabzevari University
Sajad Bayat
B.Sc. Student of Civil Engineering, Hakim Sabzevari University