Numerical investigation of Ranque-Hilsch vortex tube
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 548
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CHCONF04_382
تاریخ نمایه سازی: 8 آذر 1396
چکیده مقاله:
In this article, a Ranque–Hilsch Vortex Tube has been optimized utilizing divergence and convergence axial angles forhot tube. Effect of divergence and convergence angles on the flow behavior has been investigated by computational fluiddynamics (CFD) techniques. By using a standard k-ԑ turbulence model based on finite volume method, all thecomputations have been carried out. The dimensions of the studied vortex tubes have been kept the same for all modelsand the performance of machine was studied under five different divergence angles (β), namely 1, 2, 3, 4 and 6 degree,two different convergence angles named 1 and 2 degree adjusted to the hot tube. Achieving a minimum cold exittemperature is the main goal of this numerical research. The results show that utilizing the divergent kind of hot tubeimproves the cooling capacity of device for most values of inlet mass flow rates. Finally, some results of the CFD modelshave been validated by the available experimental and numerical data and which show reasonable agreement, and otherones are compared qualitatively.
کلیدواژه ها:
Ranque – Hilsch vortex tube ، Divergent vortex tube ، Convergent vortex tube ، Energy optimization ، CFD
نویسندگان
Mazyar Abdar
Department of Petroleum Engineering, Petroleum University of Technology (PUT), Ahwaz, Iran
Ali Asghar Rezaei
Department of Petroleum Engineering, Petroleum University of Technology (PUT), Ahwaz, Iran
Khalil Shahbazi
Department of Petroleum Engineering, Petroleum University of Technology (PUT), Ahwaz, Iran