New Heat Treatment Method for Improving the Structure of Nanocrystalline Alloys
محل انتشار: سومین کنفرانس نانوساختارها
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,535
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_023
تاریخ نمایه سازی: 21 دی 1388
چکیده مقاله:
Nanocrystallization Process of two Finemet alloys with the compositions of Fe73.5Si13.5B9Nb3Cu1 and Fe77Si11B9Nb2.4Cu0.6 was investigated by active screen plasma nitriding (ASPN) treatment in different temperatures ranging from 410 °C to 560 °C, with 3:1 and1:3 N2/H2 ratios for 3 h. The amorphous ribbons were then annealed under vacuum at the same time and temperatures mentioned above. Differential Scanning Calorimetry (DSC), X-ray Diffractometery (XRD), Atomic Force Microscopy (AFM), magnetic characterization by a Vibrating Sample
Magnetometer (VSM) were utilized to characterize the treated samples.ASPN treatment led to finer grain size and higher crystalline volume fraction. The comparison of the DSC data for the alloys suggested that the smaller amount of Nb as a growth inhibitor shifted the crystallization temperaturesThe maximum saturation magnetization and coercivity at 480 °C were obtained in Fe77Si11B9Nb2.4Cu0.6 alloy after nitriding under 75% H2 and 75% N2 gas mixture, respectively.
کلیدواژه ها:
نویسندگان
E Memarzadeh Lotfabad
Department of Materials Science and Engineering, Sharif University of Technology, Tehran
H.A Madaah Hosseini
Department of Materials Science and Engineering, Sharif University of Technology, Tehran
H.A Shivaee
Institute for Nanoscience and Nanotechnology, Sharif University of Technology,