NANOCOMPOSITES BASED ON COMPATIBILIZED TERNARY BLENDS OF PP/EPDM/PA6: Microstructure
محل انتشار: دومین کنفرانس بین المللی کامپوزیت
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,796
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT02_023
تاریخ نمایه سازی: 24 مهر 1389
چکیده مقاله:
Ternary polymer blends based on polypropylene (PP)/Polyamide6 (PA6)/Ethylene Propylene Diene Monomer (EPDM) (70/15/15) were prepared by melt blending using twin-screw extruder. EPDM-g- MA was also added to the system as the compatibilzing agent. Effect of processing parameters on the formation of ternary polymer blends were investigated using design of experiments (DOE) and accordingly optimal processing conditions including barrel temperature, screw speed and blending sequence were chosen as: 220ºC, 150 and preparing master batch of (EPDM+EPDM-g-MA+PA6) before blending this master batch with PP, respectively. Compatibilized PP/EPDM/PA6/Cloisite 15A nanocomposite samples were prepared according to the results analyzed by the DOE software and effect of presence of nano-silicate layers on the microstructure and particle size distribution of PA6 and EPDM minor phases was investigated
کلیدواژه ها:
نویسندگان
Shirin Shokoohi
Ph.D. Candidate, Amirkabir University of Technology, Tehran, Iran
Ahmad Arefazar
Professor, Amirkabir University of Technology
Ghasem Naderi
Assistant Professor, Iran polymer and petrochemical institute, Teharn