Structure and Glass Transition Temperature of PMMA/Clay nanocomposites synthesized through in situ-Reversible Addition- Fragmentation Transfer (RAFT) Polymerization
محل انتشار: دومین کنفرانس بین المللی کامپوزیت
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,497
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT02_143
تاریخ نمایه سازی: 24 مهر 1389
چکیده مقاله:
In this research poly(methyl methacrylate)/clay nanocomposite was prepared through reversible additionfragmentation transfer (RAFT) polymerization. Two synthesized RAFT agents, 3-(morpholino-4- carbothioylsulfanyl)-propionic acid methyl ester (RAFT-І) and diethyl-dithiocarbamic acid 2-carbamoyl-ethyl ester (RAFT-ІІ) were used. The morphology of samples was determined with X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results indicated the proper intercalation of polymer chains between silicate layers. Dynamic mechanical thermal analysis (DMTA) was also used to determine the glass transition temperature (Tg) of samples. It was found that Tg is reduced in nanocomposites relative to that in neat polymer
کلیدواژه ها:
نویسندگان
A.H Navarchian
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, P. O. Box ۸۱۷۴۶-۷۳۴۴۱, Isfahan, Iran
SH Sadeghi-Ardakani
Department of Chemical Engineering, Faculty of Engineering
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :