An Analytical and Numerical Investigation of Stiffness Matrix of Different Lattice Grids in Advanced Grid Stiffened Composite Structures

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,470

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT02_162

تاریخ نمایه سازی: 24 مهر 1389

چکیده مقاله:

Grid Stiffened Composite Structures are the most attractive lightweight which their optimal design would lead to a stretching dominated structure. Due to possibility of usage of various forms of grids in manufacturing process of lattice composite structures, it is necessary to have a deeper knowledge of the unit cells of these grids. In this article, different kinds of grids known as, Bi-Grid with two stacks of struts, Tri-Grid with three stacks of struts and Quadri-Grid with four stacks of struts have been investigated. Three different kinds of unit cell with different dimensions for mentioned grids with equal area and mass have been assumed. Iso-grid as a special case of Tri-grid has also been studied. Then stiffness matrix has been developed theoretically and the results have been compared to each other. The analysis has been developed in accordance with the equivalent continuum method and coordinates transformation by considering the anisotropic properties of the stiffness of lattice grid composites. Also, numerical investigation is followed using ANSYS FEM code to verify the analytical results. In addition of the comparison of the results, a parametric study is discussed to check the geometrical parameters’ effects on the stiffness matrix for different kinds of mentioned grids.

نویسندگان

H Shahsavari Alavijeh

Graduate student,

S Sadeghnejad Limouei

Graduate student

M Sadighi

Associate Professor, Department of Mechanical Engineering, Amirkabir University of Technology, Hafez Ave., Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Troitsky, M.S. (1976). Stiffened Plate Bending, Stability and Vibration, Elsevier ...
  • Sumec, J. (1990). Regular Lattice Plates and Shells, Elsevier Science, ...
  • Cheng, H.J. and Tsai, S.W. (1996). Analysis and Optimum Design ...
  • Huybrechts, S.M., Meink, T.E., Wegner, P.M., Ganley, J.M. (2002). Manufacturing ...
  • Guoqiang Li, Jinquan Cheng, (2007), A Generalized Analytical Modeling of ...
  • H.L. Fan, D.N. Fang, (2008), Anisotropic Mechanical Properties of Lattice ...
  • Noor, A.K. (1988). Continuum Modeling of Repetitive Lattice Structures, Applied ...
  • Huybrechts, S. and Tsai, S.W. (1996). Analysis and Behaviour of ...
  • Hohe, J., Beschorner, C. and Becker, W. (1999). Effective Elastic ...
  • Hohe, J. and Becker, W. (1999). Effective Elastic Properties of ...
  • Fan, H.L. and Yang, W. (2006). The Equivalent Continuum Method ...
  • نمایش کامل مراجع