Evaluating the Effect of Ceramic Coating on Temperature Gradient ofEngine Pistons
محل انتشار: چهارمین کنفرانس بین المللی کامپوزیت
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 683
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT04_037
تاریخ نمایه سازی: 22 مهر 1394
چکیده مقاله:
It is noted that the aluminum made pistons of most internal combustion engines has a thermal expansioncoefficient 80% higher than the cylinder bore made of cast iron. So, it is very important to investigate the piston temperature distribution in order to maintain the thermal stresses and deformations within acceptable levels. In thisarticle, the effect of ceramic coating on thermal behavior of a diesel engine piston is numerically investigated by COSMOS. For coated piston, a considerable reduction is found thermal gradient and maximum temperature.
کلیدواژه ها:
نویسندگان
M Namjoo
Department of Biosystems Engineering, University of Jiroft, Jiroft, ۷۸۶۷۱-۶۱۱۶۷, Iran.
H Golbakhshi
Department of Mechanical Engineering, University of Jiroft, Jiroft, ۷۸۶۷۱-۶۱۱۶۷, Iran.
I Mehni
MSc student, Department of Biosystems Engineering, University of Jiroft, Jiroft, ۷۸۶۷۱-۶۱۱۶۷, Iran