Study on Physical and Mechanical Properties of BagasseFiber/Thermoplastic Starch Biocomposite

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 780

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT04_091

تاریخ نمایه سازی: 22 مهر 1394

چکیده مقاله:

The use of natural polymers in composites has ceaselessly increased, due to environmental problems ofpetroleum-based polymers that are growing day by day. As the matter of the fact, the use of biodegradable polymers as a lower raw material costs from forest industries to develop new composites will not only reduce environmentalproblems but also affect the economy positively. This work evaluates the use of Bagasse fibers (BF) as a reinforcing agent to prepare thermoplastic starch (TPS) matrix plasticized with 28wt % of glycerol and 20wt % of water. Theresults showed that by increasing fiber content from 0 to 1.5 part per hundred (phr), the tensile strength and Young’s modulus were increased by 57% and 72% respectively, while the elongation was reduced from 26.8 to 14.1%. X-raydiffractograms (XRD) illustrated that gelatinization phenomenon of starch has been occurred in presence of plasticizer completely.

نویسندگان

A Ghasemi

M.Sc. Student, Polymeric Materials Research Group, Department of Materials Science and Engineering, Sharif University ofTechnology, Tehran, ۱۱۱۵۵-۹۴۶۶, Iran.

M Amiri

M.Sc. Student, Polymeric Materials Research Group, Department of Materials Science and Engineering, Sharif University ofTechnology, Tehran, ۱۱۱۵۵-۹۴۶۶, Iran.

A Aslani

B.Sc. Student, Polymeric Materials Research Group, Department of Materials Science and Engineering, Sharif University ofTechnology, Tehran, ۱۱۱۵۵-۹۴۶۶, Iran

R Bagheri

Professor, Polymeric Materials Research Group, Department of Materials Science and Engineering, Sharif University ofTechnology, Tehran, ۱۱۱۵۵-۹۴۶۶, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • _ Curvelo, A. A S., de Carvalho, A. . F., ...
  • . Herrmann, A. S., Nickel, J., & Riedel, . Polymer ...
  • . _ _ & Moates, G. K. Carbohydrate ...
  • . _ _ P., & Feil, H. Polymer 39, p. ...
  • . Averous, L., Fauconnier, N., & Moro, L. Journal of ...
  • _ _ _ _ Science. pp. 3092-3098, 2012. ...
  • . Lopez, J. P., P. Mutije, A. J. F. Carvalho, ...
  • . _ _ _ JFG. Carbohyd Polymer 63, pp. 351-360, ...
  • . Girones, J., J. P. Lopez, P. Mutje, A. J. ...
  • نمایش کامل مراجع