Influence of Interface Fiber Orientation on Delamination Initiation and Growth of Laminated Composites under Mode II Loading

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 263

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT05_018

تاریخ نمایه سازی: 6 مهر 1397

چکیده مقاله:

In this study, the effect of interface fiber orientation on delamination initiation and growth of the end notch flexure (ENF) specimen was investigated. The ENF specimens with stacking sequences of [012//012] and [011/90//012] were manufactured by the hand lay-up method and tested based on the ASTM standard. Experimental results show that the interface fiber angle has a significant effect on the initiation and propagation of delamination behavior of ENF specimens. The initiation values of the critical strain energy release rate (SERR) of ENF specimens with 0//90 interface are lower than that of specimens with 0//0 interface. In addition, the specimens with 0//90 interfacehave a stable crack growth.

نویسندگان

m.m shokrieh

Professor Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University ofScience and Technology, Tehran, ۱۶۸۴۶-۱۳۱۱۴, Iran

m Mohaghegh

M.Sc. Student Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology,Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran

m Salamat-Talab

Ph.D. Student Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran